Ovmat 9

Ovmat 9

Price - $2,700.00

It has been conceived on the basis of long experience in the production of cylinder pre – heating furnaces, feature an extremely easy programming, they are fitted with the most accurate programming and control system based on a micro processing structure.

 

The Furnace
Fitted with a stainless steel envelope, it absolutely runs no risks of corrosion due to flue gases and steam.

The Furnace Chamber
It is formed by four radiant - section shielded heating plates featuring a high thermal efficiency. Thanks to its particular structure, it allows to obtain a steady temperature on the whole of its components.

The Door
The fettling fitted with a high quality lagging assures a steady thermal uniformity inside the furnace chamber.

The Door Movement
Its very tough structure is of horizontal parallelogram type and is fitted with a self-lubricating system. The door does not require any maintenance intervention and it will not get stuck even after long period of daily use.

Safety
In order to prevent even the slightest possibility of accident, each furnace model has been provided with a safety  micro-switch cutting off the power supply to the heating  plates, every time the door is opened. The bipolar - fuse protection system guarantees a total compliance with the strictest safety standards.

INSTRUMENTATION
Control Panel
-  Two alphas - numeric digital displays allow an immediate reading of the temperature and time, both during  programming and working phase.
-  Digital display for the visualization of the required program.
-  Luminous led to determine the phase of the cycle both during programming and working phase.
-  Soft - touch type-operating push – buttons.
-  Electrical - connection led.
-  Powered - furnace led.
-   Aspirator - on led.
-   End - of - cycle warning led.

Ten Storable Programs
Possibility of entering two intermediate temperatures and the final temperature together with the speed relevant to the achievement of the temperatures themselves.

Deferred Starting
Possibility of entering the deferred starting of the furnace up to 100 hours.

Programmed Aspiration
Possibility of programming the automatic switching off the gas exhauster (in case the furnace is fitted with the exhauster).

Alarm System
A luminous and optical alarm will switch on whenever the preset time for the exposure to final temperature is over.

Exhauster
OVMAT 9 can be provided with gas exhauster upon customer’ s request.

TECHNICAL DATA and CHARACTERISTICS

Heating Chamber                        OVMAT 9
Width                                             16 cm
Depth                                             30 cm
Height                                            15 cm
Overall Dimensions
Width                                             33 cm
Depth                                             58 cm
                                 (+10cm if fitted with aspirator)
                              
Height                                            54 cm
Capacity                         10 cylinders for skeletons
                                               
Weight                                          46 kg.
Working                   
Temperature                                1100 C
Max Consumption                       2800 Watts
Power Supply                              220 Volts
                                                      Single - phase

SMALLCAST and MILLENNIUM

SMALLCAST and MILLENNIUM

smallcast - $8,000.00

smallcast millennium - $8,500.00

SMALLCAST & MILLENNIUM are Induction Casting Machines purposely conceived for small size goldsmith’s labs only.

SMALLCAST  has been designed for the laboratories where the room is a problem or the freight costs should be minimized.
SMALLCAST  and  MILLENNIUM  differ from each other only in height.
SMALLCAST  has to be placed on a suitable stand.
MILLENNIUM and SMALLCAST are available in the  “ R “ version ( with temperature  control ).

FEATURES:

          • Self - diagnostics of circuits and safety devices.
          • Manual and fully automatic casting cycle.
          • Casting power setting feature.
          • Instantaneous - reading control and stabilization of the temperature set in the range from:
          • to  2000  C ( on “ R “ models ).
      • Powered movement of the casting coil.
      • Manual or automatic centrifugation control.
      • Equipped with motor breakaway torque regulator to control the metal flow to the casting ring.
      • Build - in  cooling system.

SMALLCAST & MILLENNIUM are SUPPLIED WITH:

“ AU “   version: rigid arm and only the equipment for gold castings with  KG 20 or KGV 20 graphite crucibles.
“ PT “    version: double - elbow arm and only the equipment for platinum castings with Y 15 PT crucible.
“ MIX ” version: rigid arm for gold castings with KG 20 or KGV 20 graphite crucibles and double - elbow
arm for platinum castings with Y 15 PT crucible.

 

  • METAL                    QUANTITY ( GRAMS )             CRUCIBLE                 CASTING TIME
  • AU  24 k                                   200                                         KG 20                              3’ 25 “
  • PT                                             100                                        Y 15 PT                                 3’

Oxyker Dry Oxyker Dry

Price - $1,100.00

VERSATILITY:

Oxyker Dry can work with all types of abrasives with grains between 50 and 250 m (aluminum oxide, emery, glass pearls). For this purpose three nozzles with diameter of 0.8 mm -  1 .2 mm and 1. 5 mm respectively are supplied. The supplementary Sylox module can be installed in addition to the two internal
Sand tanks.

CHARACTERISTICS:

Output:  9 W
Voltage: 220 / 240 V
Dimensions:
Width: 40 cm
Depth: 43 cm
Height: 32 cm

SAFETY:

Oxyker Dry has been built in accordance with TUV safety standards. Oxyker Dry must be used with a suitably - powered aspirator unit, such as the AM 28, meeting GS safety standards.


Aspirator am 28

ASPIRATOR – AM 28

Price - $ 580.00

The AM 28 Aspirator can be supplied as an optional and its quick fitting means it can be easily combined with other equipment.

 

 

AM 28 complies with the GC safety regulations.

Output:                    800 W.
Voltage:           220 / 240 V
Suction:                      39 lt
Dimensions:        
Width:                      26 cm
Depth:                      24 cm
Height:                     25 cm
Weight:                     12 kg

ERGONOMICS:

Angled set - up of hand accesses. Bright neon lamp that does not dazzle. Wide window protected by a quick - change plastic film. Easy to grip and maneuver nozzles mounted on the terminals. Pneumatic commands with pedal.Connection to the quick - fit suction tube (supplied).

Aurum Digital 150

Aurum Digital 150

Please contact us for pricing details.

This machine has the same casting performances as Aurum Digital but a side melter has been added to allow static meltings up to 150 cc of volume.

Side Melter Features: Max melting capacity: 150cc (2.8kg 24k Au) Melting Time: 2kg(1287pwt) of 24k gold in 6' about

Crucibles: CC150s-CG150s-CG150sXQ-CGV150s

Optionals: Device for protective neutral gas (Argon) kit of accessories for crucibles: C100s CG60s

Overall Dimension: Depth 87cm(34")+ 23 cm (9") pump tank Width 116cm (46") Height 106cm (42") Weight 266kg (587lb)

Aurum Digital

Aurum Digital

Please contact us for pricing details.

This casting machine is recommended for small and medium sized jewellries. Thanks to its versatility Aurum Digital can melt and cast any gold alloys of any karat, silver, platinum, and many other non-precious alloys.

Features: International safety and health regulations Cooling water pump with tank Arm acceleration rate-Temperature control Max melting capacity and time 40cc: 760gr (490pwt) of 24kgold in 3' Any casting ring can be fitted up to 11cm (4.33") diam. and 14cm (5.33") height

Crucibles: C35-C65-CG20-CG20XQ CGV20-CG40-CG40XQ-CGV40

Optionals: Kit of accessories for Platinum special platinum feature(before purchase only) device for protective neutral gas (Argon)

Overall Dimension: Depth 87cm(34")+ 23 cm (9") pump tank Width 76cm (30") Height 106cm (42") Weight 245kg (540lb)

Power Supply: Three phase only, 220V or 380v-7.2kW


Dynaflask

Dynaflask

price - $7,500.00

Dynaflask is a hydro-deflasker to remove investment from cylinders making the castings free of any plaster trace. The whole machine is built in stainless stell. A metal filtering system and a perfect water draining allow a complete selection of metal scrapes from plaster. The draining tank is included.

Features: international safety and health regulations insulated halogen lamp on the working room 70bar water pump wide working chamber (63x46cm - 25"x18") water consumption: 8 1/min

Overall Dimension: Depth 55cm(22") Width 70cm (15") Height 106cm (42") Height 159cm(63") Weight 70kg (155lb)

Statix Digital HD 150F - 350F - 600F

Statix Digital HD 150F - 350F - 600F

Please contact us for pricing details.

Heavy duty furnaces Statix Digital HD F have been created for alloying, chain manufacturers and for factories who often need to re-melt buttons, pins or scraps.

Available Models: 150F - 350F - 650F (Figures also show capacity in cc)

Features: International safety and health regulations Colling water pump - Temperature controller

Max melting capacity and time: 150F: 2.8kg (1800pwt) of 24k gold in 8' 350F: 6.5kg (4180pwt) of 24k gold in 12' 600F: 11.4kg (7340pwt) of 24k gold in 18'

Crucibles: 150F: CC150s-CG150sXQ-CGV150 350F: CC350s-cg350S-CG350sXQ 600F: CG600s-CG600sXQ

Optionals: Device for protective neutral gas (Argon) Special and Platinum melting features(only on request before purchase)

Overall Dimensions: Width 85cm (34") + 23cm (9") pump Depth 70cm (26") Height 107cm (42") Weight 240kg (529lb)

Power Supply: 150F: 220 OR 380V, 7kW, threephase 350F & 600F: 220 or 380V, 9kW, threephase

Magnum Digital

Magnum Digital with KIT for PLATINUM and INVERTER

Price - $17, 000.00

We propose this unexpensive machine for medium and large sized jewelleries where heavy duty work is required. Thanks to its versatility Magnum Digital can melt and cast any gold alloys of any karat, silver, platinum, and many other non precious alloys.

Features: International safety and health regulations Cooling water pump with tank Arm acceleration rate-Temperature control Max melting capacity and time 120cc: 2.2kg (770pwt) of 24k gold in 6' Any casting ring can be fitted up to 13cm (5")diam. and 20cm (7.8") height

Crucibles: C120-CG120-CG120XQ-CG20XQ-CGV120

Optionals: Kit of accessories for Platinum - special Platinum feature (before purchase only) accessories for crucibles: C35-C65-CG20 CG20XQ-CGV20-CG40-CG40XQ-CGV40 accessories for stainless steel casting device for protective neutral gas(Argon)

Overall Dimension: Depth 101cm(39") Width 90cm (35") Height 103cm (40") Weight 293kg (646lb)

Power Supply: Three phase only, 220V or 380V-9,1kW

Magnum Digital 350

Magnum Digital 350

Please contact us for pricing details.

This machine has the same casting performances as Magnum Digital but a side melter has been added to allow static meltings up to 350cc of volume.

Side Melter Features: Max melting capacity: 350cc (6.6kg 24k Au) Melting Time: 5kg(3215pwt) of 24k gold in 12' about

Crucibles: CC350s-CG350s-CG350s-CG350sXQ

Optionals: Kit of accessories for crucibles: C100s CG60s Kit of accessories for crucibles: CC150s CG150s-CG150sXQ-CGV150s Device for protective neutral gas

Overall Dimension: Depth 101cm(40") Width 130cm (51") Height 103cm (40") Weight 332kg (732lb)

Neutor Digital

Neutor Digital with kit for platinum

Price - $ 21, 000.00

This casting machine has been designed for small and medium sized jewellries where top quality is required. Thanks to its versatility Neutor Digital can melt and cast any gold alloys of any karat, silver, platinum, and many other non-precious alloys with a choice of the most suitable enviorment condition between natural, vaccum, or neutral atmosphere.

Features: International safety and health regulations Cooling water pump with tank Arm acceleration rate-Temperature control Max melting capacity and time 40cc: 760gr (490pwt) of 24kgold in 3' Any casting ring can be fitted up to 11cm (4.33") diam. and 14cm (5.33") height

Crucibles: C35-C65-CG20-CG20XQ CGV20-CG40-CG40XQ-CGV40

Optionals: Kit of accessories for Platinum

Overall Dimension: Depth 82cm(32")+ 23 cm (9") pump tank Width 74cm (29") Height 95cm (37") Weight 321kg (707lb)

Power Supply: Three phase only, 220V or 380v-7.2kW

Neutor Digital 150

Neutor Digital 150

price - used $7,000.00

This machine has the same casting performances as Neutor Digital but a side melter has been added to allow static meltings up to 150cc of volume.

Side Melter Features: Max melting capacity: 150cc (2.8kg 24k Au) Melting Time: 2kg(1287pwt) of 24k gold in 6' about

Crucibles: CC150s-CG150s-CG150sXQ-CGV150s Device for protective neutral gas (Argon)on side melter included

Optionals: Kit of accessories for crucibles: C100s CG60s

Overall Dimension: Depth 110cm(43" Width 120cm (47") Height 110cm (43") Weight 332kg (732lb)

Statix Digital HD R 150R - 350R - 600R

Statix Digital HD R 150R - 350R - 600R

Please contact us for pricing details.

Heavy duty furnaces Statix Digital HD R are similar to those of the serie F except for the coil that tilts together with the crucible thus allowing uniform casting with continuous flow without metal splashes.

Available Models: 150R - 350R - 650R (Figures also show capacity in cc)

Features: International safety and health regulations Colling water pump - Temperature controller

Max melting capacity and time: 150R: 2.8kg (1800pwt) of 24k gold in 8' 350R: 6.5kg (4180pwt) of 24k gold in 12' 600R: 11.4kg (7340pwt) of 24k gold in 18'

Crucibles: 150R: CC150s-CG150sXQ-CGV150 350R: CC350s-cg350S-CG350sXQ 600R: CG600s-CG600sXQ

Optionals: Device for protective neutral gas(Argon) Special and Platinum melting features(only on request before purchase)

Overall Dimensions: Width 85cm (34") + 23cm (9") pump Depth 70cm (26") Height 107cm (42") Weight 240kg (529lb)

Power Supply: 150R: 220 OR 380V, 7kW, threephase 350R & 600F: 220 or 380V, 9kW, threephase

Neutromag Digital 350

Neutromag Digital 350

Please contact us for pricing details.

This machine has the same casting performances as Nuetromag Digital but a side melter has been added to allow static meltings up to 350cc of volume.

Side Melter Features: Max melting capacity: 350cc (6.6kg 24k Au) Melting Time: 5kg(3215pwt) of 24k gold in 12' about

Crucibles: CC350s-CG350s-CG350s-CG350sXQ Device for protective neutral gas(Argon)

Optionals: Kit of accessories for crucibles: C100s CG60s Kit of accessories for crucibles: CC150s CG150s-CG150sXQ-CGV150s

Overall Dimension: Depth 130cm(51") Width 143cm (56") Height 103cm (51") Weight 592kg (1305lb)

Neutromag Digital

Neutromag Digital

Please contact us for pricing details.

Top quality and heavy duty work are the chances given by this machine. Thanks to its versatility Magnum Digital can melt and cast any gold alloys of any karrat, silver, platinum, and many other non precious alloys with the choice of the most suitable enviorment condition between natural, vaccum or neutral atmosphere.

Features: International safety and health regulations Cooling water pump with tank Arm acceleration rate-Temperature control Max melting capacity and time 120cc: 2.2kg (770pwt) of 24k gold in 6' Any casting ring can be fitted up to 11cm (5") diam. and 20cm (7.8") height

Crucibles: C120-CG120-CG120XQ-CG20XQ-CGV120

Optionals: Kit of accessories for Platinum - special Platinum feature (before purchase only) accessories for crucibles: C35-C65-CG20 CG20XQ-CGV20-CG40-CG40XQ-CGV40 accessories for stainless steel casting

Overall Dimension: Depth 108cm(42") width 103cm (40") Height 106cm (42") Weight 466kg (1028lb) Weight 293kg (646lb)

Power Supply: Three phase only, 220V or 380V-9,1kW

Mixyvac

MIXYVAC  T  -  Vacuum Mixer with VIBRATOR

price - $2,200.00

The  MIXYVAC vacuum mixer for plaster and coatings has been designed according to the most advanced  ergonomic indications available, so as to allow the maximum rational operation.

Vacuum
The incorporated pump is very silent and almost immediately creates a high degree vacuum, thus permitting excellent mixing which includes air bubbles in the mass. The vacuum is inserted automatically at the beginning of the mixing process. The vacuum gauge indicates that the pump is functioning correctly.

Timer
The timer permits the programming of the duration of the mixing up to 60 seconds.

Protection of the Pump
In order to guarantee long duration of the equipment, the pump is furnished with a double filter on the suction circuit, placed in such a way as to avoid even a minimum quantity of dust, being sucked up into the
pump itself. The control of the oil level in the pump and its relevant elements for filling and draining the oil, reduces to a minimum the maintenance of the  MIXYVAC.

Mixing
The MIXYVAC is supplied with two mixing bowls, respectively 170 cc and 560 cc.
The insertion of the mixing bowls on the rotation system happens automatically thanks to the self-centering
Mobile platform.

Pouring
In order to obtain the maximum ease of handling during the pouring of the coating, the MIXYVAC mixer has been supplied with a vibrating platform placed on the work bench.
The MIXYVAC mixer can be placed on a work bench or can be hung on a wall.

TECHICAL CHARACTERISTICS and DATA

ROTATTION SPEED:  210 rpm
HEIGHT         51 cm   ( 20 in )
DEPTH           29 cm  ( 11 ½  in )
WIDTH           39 cm  ( 15 ¼  in )
WEIGHT         29 kg  ( 64 lb )
VOLTAGE       220 Volts
POWER          220 Watt

Mixyvac s

mixyvac s

price - $1,600.00

This small plaster mixer is the most suitable for platinum and primary model flasks.

  • Double timer with time – delay switching on the suction pump.
  • Digital display.
  • Built - in vacuometer
  • Simplified infeed and extraction of the mixing cups.
  • Mixing cup, 170 c. c. capacity ( inclusive of cover and mixing blade ).

 

 

Optional:

Mixing cup, 560 c. c capacity  ( inclusive of cover and mixing blade ).

Polishing tumbler king 2

POLISHING TUMBLER

POLISHING TUMBLER   - KING 2 Price - $2,200.00

POLISHING TUMBLER with REGULATOR  - KING 2 Price- $2,600.00

FEATURES:

KING 2   polishing tumblers find their optimum use in goldsmiths, optical and metal surfaces treatment sectors for metal trimming, polishing and shining operations. The working principle is based on tank rotate movement with rubbing of the pieces with smooth or abrasive particles, on the basis of  the  required final result. Particular inclination of the tank allows a double movement of the tumbling mass, with improvement of final result and of the working times. This kind of surface finishing allows an optimum result with capital and running cost extremely reduced.

Hermetic locking system of the tanks give the possibility to work in safety and hygiene conditions and
allows the recovery of precious particles removed during the working operations, by the water treatment in proper installations.

King tumbler is entirely made of hot - painted iron and is available in single or double anti - acid PVC tanks versions. Both models are equipped with instrument panel complete with main back - lighted switch and timer. Variable speed models are also equipped with electronic speed regulator.

Jewellaser 100JEWELLASER 100

Price:  $ 29, 000.00 Dollars

Use:  Heavy Duty Laser Welder - for any metal - highly performing on Silver and thick Platinum

Pulse Current: 100 - 350 A electronically adjustable with 1 A step

Pulse Duration: 0.5  - 15 ms adjustable with step 0.5 ms

Welding Spot: 0.3 - 2.0 mm – electronically adjustable with step 0.1 mm

Laser Source: Nd:  Yag

Wave Length: 1064 nm (infrared)

Pulse Frequency:  1 – 10 Hz dynamic

Pulse Energy: 100-Joule max

Welding Power: 100 watt max

Parameters:  All parameters can be electronically adjusted by built - joystick or by external keyboard

Programs:  50 programs containing all welding parameters with a full description

Microscope: Zeiss, Stemi 2000, Zoom 4 -25 x

Video camera: Supplied

Aiming System: Webbed eyepiece and aiming beam

Protection Gas Supply: 2 Argon gas pipes individually adjustable and controlled by solenoid valve

Working Chamber Light:  Double cold halogen light source through 2 optical fibers with electronic
                                               brightness  regulator

Compressed Air Supply: Air strain syringe inside the working box

Smoke Suction System: Integrated system

Welding Smoke Filter: Active carbon filter + electrostatic filter
Cooling System: Sealed air - Water system + 1300 W Refrigerator 

PC Connection: Supplied

Power Supply: 220 or 380 V Threephase

Absorbed Power: 5 kw

Weight: 185 kg

Overall Dimension: L 500 x D 1000 x 1150 H mm

Platinum cruciblesPlatinum Crucibles

Please contact us for pricing detials

To obtain the best results with platinum it is essential to use high quality special crucibles. Our 35 year expertise guarantees that our crucibles for platinum are among the best available on the market.

Y15Pt: This crucible allows the casting of up to 150 grams platinum

Y35Pt: This crucible allows the casting of up to 250 grams platinum but according to some of our most experienced customers, it can cast up to 350 grams. This crucible can be used only with MAGNUM and NEUTROMAG

Y100Pt: This crucible has been designed to melt up to 2 kg of platinum (but is not common to melt more than 1200 grams) and to re-melt platinum buttons, pins or scrapes.